Electric Recovery Winch 8000 lbs 5.5HP

Electric Recovery Winch 8000 lbs 5.5HP

• Single Line Rated Pull: 8000 lbs (3629 kg); Motor: 5.5hp/4.0kw (12V); Gear Reduction Ratio: 148.2:1
• Efficient three-stage planetary gear train helps to offer powerful horsepower; 4-way roller fairlead to guide the rope onto the drum evenly
• Automatic braking in the drum will lock the wire rope and stop pulling when you release button on the switch
• Power IN and OUT through a remote switch with 12ft lead; Convenient and safety design with button for switch from wired to wireless control
• Extra protective casings for connectors, insuring safety and low wear-out; Custom gaskets seal up critical inner components from water and debris infiltration

Features:

– 8,000LBS (single line rated pull) Electric Winch
– Free spooling clutch allows the wire rope to be pulled out without using electric power
– Power IN and OUT through a remote switch with 12ft lead
– Convenient and safety design with button for switch from wired to wireless control
– Automatic braking in the drum will lock the wire rope and stop pulling when you release button on the switch

Specifications:

– Single Line Rated Pull: 8000 lbs (3629 kg)
– Motor: 5.5hp/4.0kw (12V), Series Wound
– Gear Reduction Ratio: 148.2:1
– Gear train: 3 Stage Planetary
– Fairlead: 4-Way Roller Fairlead
– Clutch: Sliding Ring Gear
– Braking Action: Two way braking action in the drum
– Remote Control: Wired
– Control: remote switch with 12ft (370 cm) lead
– Drum Size (Dia. x L): 2 1/2″ x 8 13/16″ (64 x 224 mm)
– Cable Size (Dia. x L): 5/16″ x 92′ (8.1mm x 28m)
– Battery Recommended: 650CCA minimum for winching
– Battery Lead: 2 gauge, 72″ (183 cm)
– Overall Dimension (LxWxH): 21 1/8″ x 6 5/16″ x 8 9/16″ (537 x 160 x 218 mm)
– Mounting Bolt Pattern (LxW): 10″ x 4 1/2″ (254 x 114.3 mm)
– Weight: 73.7 lbs (33.5 kg)

Package Contents:

– 1x 8000lbs Winch
– 1x Solenoid Box Assembly
– 1x Roller Fairlead
– 1x Remote Switch with 12ft Lead
– 1x Hook
– 1x Safety Pull Strap
– 1x Battery Lead
– 1x Set of Fixing Accessories
– 1x Manual

Notice:

– Mounting plate is not included. You need a suitable winch mounting plate to hold your winch and fairlead before installing the winch onto your vehicle. (The type of mounting plate should refer to if your vehicle equipped with a fender guard or not.)
– Do not use winch as a hoist, do not use for transportation of people.
– Do not operate and spool under full load over one minute continuously.
– While motor is over heating, please stop for a while to cool down.